User Tools

Site Tools


Staging Block General



The ID is used through out the Rocrail program as a unique key for referencing this staging block and is therefore very important. If the ID is changed routes using this staging block have to be edited, too.


Free text for display only.

Section length

Length of a section in mm, cm or inches.1)

Train gap

Gap between the trains in mm, cm or inches.2)

Enter sensor

The first sensor of this staging block.

Enter signal

The optional distant signal for the enter side of the staging block. (Controlled by the Staging Block (so not manual) itself.)

Exit signal

The optional main signal for the exit side of the staging block.
Set the signal to manually operated to be able to control the staging block out flow.

Random rate


Timestamp of the last visit of a cleaning train in this stage block.


See Actions for more details.
Make sure that XmlScripts are set to synchrone; Disable the Asynchrone option.

1) , 2)
The same metrics as used for the train length.
stageblock/stage-gen-en.txt · Last modified: 2023/10/20 07:49 by rjversluis