Table of Contents
G-NS2400
Videos:
Description
This G locomotive is a free interpretation of the Dutch Railways series 2400 without any intention to create a 1:26 model of the original.
All the measuring of the original has been modified to fit the needs and possibilities of a locomotive in scale 1:26 on 1:32 track gauge.
The locomotive runs on a radius of minimal 90cm.
Files
LEDs
R5 and R6 on the WIOpi-01 PCB should be shortened.
Front
3 x 5mm white LED serial with 150Ω resistor.
Connector LHT1.
Tail
2 x 5mm red LED serial with 470Ω resistor.
Connector LHT1.
Smoke
1 x 5mm blue LED 470Ω resistor, BS170.
I/O2 connector pin 7(GPIO16) to BS170 gate.
I/O2 connector pin 2(GND) to BS170 source.
The resistor ist connected to +12V(VPower).
Activated by attribute smokelight="true" in the wiopi.ini.
Function F7.
Cabin
3 x WS2801 connected to SPI.
Motors
- Manufacturer: Modelcraft
- Type: RB350030-A0101R
- 12VDC 174rpm
- Interference suppression: 30V VDR
Example:
Belts
GT2 6mm
- Motor: 158mm
- Axes: 220mm
Pulleys
GT2 6mm
- Motor: 30, ø6mm axel
- Axes: 20, ø5mm axel, length=16mm
RFID Reader
Wheelset
Axes: ø5mm brass 
with M5 thread cutting.
Ball bearing: ø5mm 11x5mm
Wheel: LGB 67000-E299 37,5mm
Example:
M5-nut . washer . RGB wheel . washer . Pulley 20 . washer . Pulley 20 . washer . RGB wheel . washer . M5-nut
U-Profile
Kantoflex Quadrat-U-Profil
1000 x 7,5 x 7,5 mm, Stärke: 1 mm, Aluminium, Blank, Grau, Prod.Nr. 10522007
Example:
2 x 42cm for the frame.
Distance between bogie centres is 26cm.
M3 screws an 2.5mm holes in the profiles for M3 threads.
Battery
LiFePO4 12V8 6Ah & BMS, 145 x 66 x 39 mm.
Example:
Wiring
In the tank there is a cutout for a XT60 mounting plug and a mini toggle switch.
